0086-571-88220653 hzpt@hzpt.com
0項目
選擇頁面

WP系列蝸輪減速機

WP series reducer, the worm is made of 45 # steel through heat treatment processing, and the worm gear is cast with tin bronze. It has good wear resistance, especially outstanding in bearing capacity, and is mainly applicable to the reduction drive of various mechanical equipment such as plastic, metallurgy, beverage, mining, hoisting and transportation, and chemical construction.

Cast iron worm gearbox–Inch Dimension

 

Series UY
Series QY
Series WY
Series WDY
DSY系列
Series WDKY
WOY系列
Series WDKOY
AY系列

Please confirm the following parameters before purchasing

  1.  Please confirm the model and size you need;
  2. Please confirm the speed ratio of the reducer;
  3.  Please confirm the axial direction.

單減速機

ratio: 1/5-1/60

水漬險 掌上電腦 WPKA WPDKA
WPS的 WPDS WPKS WPDKS
世貿組織 工作組 WPZ WPDZ
WPX WPDX WPKZ WPDKZ

雙減速機

ratio: 1/100-1/3600

世界職業教育協會 WPEDA 威柏卡 WPEDKA WPE
WPEDS WPEKS WPEDKS WPEO WPEDO
WPWEDO WPWEO WPEX WPEX WPWEKO
WPWEDKO 世界職業體育聯合會 世界婦女日 職業周 WPWEDK

 

通用減速機

ratio: 1/5-1/60

WPW WPWD 工作週 WPWDK WPWA
世界婦女發展協會 工作坊 WPWDKA WPWS WPWDS
WPWKS WPWDKS WPWO 世界和平組織 WPWKO
WPWDKO WPWX WPWDX WPWKT WPWDKT
WPWT 可濕性粉劑 WPWKV WPWDKV 女武神
WPWDV

Features of cast iron worm gearbox

1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility, and can be used with various mechanical equipment.
2. Large transmission ratio can be obtained by single-stage transmission, and the structure is compact. Most types of reducers have good self-locking performance, and braking devices can be saved for mechanical equipment with braking requirements.
3. The meshing friction loss between the worm thread and the tooth surface of the 蝸輪 is large, so the transmission efficiency is lower than that of the gear, and it is easy to heat up and the temperature is higher.
4。 對潤滑和冷卻的要求更高。
5. Good compatibility, worm gears and worms are manufactured according to national standards, and 軸承, oil seals, etc. are all standard parts.

Working conditions of cast iron worm gearbox

1、蝸輪減速機的蝸輪轉速不得超過1500r/min。
2. The working environment temperature is – 40 ℃ -+40 ℃. When the working environment temperature is lower than 0 ℃, the lubricating oil is heated to above 0 ℃ before starting. When the working environment temperature is higher than 40 ℃, cooling measures are taken.
3、蝸輪減速機進口軸可正反轉。
◆ Precautions:
1. Worm gear shaft cannot be used as input shaft.
2、機器出廠時不加油。 加足機油後才能操作。
3.匹配 馬達 (i.e. power) shall not exceed the value specified on the nameplate.
4、如果用戶想改變軸的方向,可以拆下下軸的兩個端蓋,取出蜗杆軸調整180度。裝上。 可以緩慢驅動第二個軸使其嚙合。